Top-rated independent appliance repair on Oahu & the Islands
Cooktop Repair — Book a Visit Today
Cooktops here take a beating. Salt air creeps into burner terminals. Humidity settles under glass. Steam from a rice pot finds every gap in a control panel. What fails most? Igniters that click without lighting, radiant elements that stay cold, touch controls that ignore a wet finger, and burner valves gummed with old oil. A visit starts with us watching the cooktop do the wrong thing. Then we pull power, check terminals, spark modules, elements, and switches, and tell you plainly what the part is and how the ordering timeline looks — island shipping is real, so we say so upfront. Gas, electric, induction, all major brands. Call us and describe what you're seeing.
Call (888) 857-9883- Real people on the phone
- 7 days a week
- Quote in writing before any work
Taking calls until 5:00 PM HST
The cooktop symptoms we hear most
- It clicks and clicks but won't light Spark igniter, wet or clogged burner cap, or a failing spark module
- One burner is stone cold, the rest work Broken surface element, burnt receptacle terminals, or a bad infinite switch
- My touch panel won't respond Moisture under the glass, failed touch board, or control ribbon corrosion
- Flames are yellow and sooty Burner port blockage, wrong gas orifice, or poor air shutter adjustment
- Heat won't stop cycling on high Stuck infinite switch, shorted element, or a failed relay on the control board
Safe things to check first
Worth a look before you call — sometimes it saves you the visit.
- 1 Confirm the breaker for the cooktop hasn't tripped, and reset it once.
- 2Lift off burner caps and grates, dry them fully, and reseat them square in their slots.
- 3Wipe the touch glass completely dry, since a film of water reads as a finger.
- 4On induction, hold a magnet to your pan — if it doesn't stick, the pan is the problem.
Guides & troubleshooting
What homeowners get from an independent shop
| Tunista Appliance Repair | Big-box repair chains | Handyman listings | |
|---|---|---|---|
| Quote in writing before a wrench comes out | ✓ | ✕ | ✕ |
| Live answer seven days a week | ✓ | ✕ | ✓ |
| All major brands, gas and electric | ✓ | ✓ | ✕ |
| No manufacturer targets to hit | ✓ | ✕ | ✓ |
| Local techs who know the housing stock | ✓ | ✕ | ✓ |
What homeowners say after the visit
“Washer error code meant nothing to me. He knew it on sight and had it cleared in under an hour.”
June C.Aina Haina, HI“Polite on the phone, polite at the door, and the laundry room was cleaner when he left than when he came.”
Earl D.Captain Cook, HI“Our cooktop had one dead burner for a year. One visit, all five working. Should have called long ago.”
Tess G.Kamehameha Heights, HICooktop Repair — quick answers
Do you work on gas and electric both?
Yes. Gas sealed burners, coil elements, radiant glass tops, and induction. We're an independent shop and service all major brands. Tell us the brand and roughly how old the unit is when you call us, and we'll come prepared.
Why does my igniter keep clicking after the burner lights?
Usually moisture or spilled food bridging the spark electrode, so the module keeps firing. Drying the burner area often stops it. If clicking continues dry, the switch or spark module is failing and needs replacing.
How long do parts take to arrive?
That depends on the part and the boat. Common elements, switches, and igniters often move quickly. Control boards and glass tops for less common models can take longer to reach the islands. We give you a realistic window before ordering anything.
Can a cracked glass cooktop be repaired?
Cracks in ceramic glass can't be patched safely. The panel gets replaced as a unit. Stop using that surface right away — moisture reaching the elements underneath creates a shock hazard. Call us and we'll check whether the panel is still available.
Is salt air really hard on a cooktop?
It is. Coastal homes see corrosion on burner terminals, element receptacles, and control connections faster than inland homes. Green or white crust on a plug means resistance and heat. Cleaning and replacing corroded connectors is routine work for us.
Should I turn off the gas before you arrive?
Only if you smell gas. Then shut the supply valve, open windows, skip the light switches, and call the gas company first. Otherwise leave things as they are so we can see the fault happen for ourselves.
How it works
- Step 1
Tell us the sound
Call us or fill in the form and describe what you hear, smell, or see. Puddle under the washer? Clicking from the fridge? Small details help us load the right parts before we drive out.
- Step 2
We look it over
Our tech opens the machine and tests for the real cause instead of guessing. Salt-eaten terminals and humid control boards hide well. You hear exactly what failed and which repair options make sense.
- Step 3
Fixed or scheduled
Many repairs finish on the same visit with parts off the van. When something has to ship in from the mainland, we tell you straight, order it, and keep you posted until it lands.
- A real person answers
- Open 7 days
- Written quote before work starts
Why homeowners call us
- Built for salt airCoastal homes chew through appliances. We check for corroded connectors, rusted brackets, and moisture sitting in control boards, because fixing the symptom means little if salt keeps eating the same part next season.
- Humidity knows-howDamp trade wind air makes dryers work harder and vents clog faster. We clear the airflow path and test moisture sensors, then explain the small habits that keep your laundry room from fighting the weather.
- Straight talk on partsShipping across the Pacific takes time, and we say so up front instead of vanishing. You get realistic timing and a plan for the wait. If a machine isn't worth waiting for, we'll tell you that too.
- Independent and localWe are an independent repair company and we work on all major brands. No sales pitch for a new unit. Neighbors talking to neighbors, in plain words, about the machine sitting in your kitchen right now.
- All major brands, gas & electricWhirlpool, Samsung, LG, GE, Maytag, Bosch, KitchenAid and more, as an independent repair company.
- Straight answersWhen a repair doesn't make sense, we tell you, sometimes before we even roll a truck.
Cooktop Repair
Small faults become big ones on a schedule of their own
Describe the symptoms and we'll book the visit — takes about a minute.
- A real person answers
- Open 7 days
- Written quotes
- All major brands
- Gas & electric
Rather not call? Get a free quote →